Dr.P.Thirunavukkarasu's blog

Method 1: Create a shortcut to Internet Explorer on your desktop Important Windows 7 no longer supports the ability to modify the registry to get the special Internet Explorer icon to appear on your desktop. This change was made to ensure Internet Explorer could be removed easily for compliance reasons. The only way to add the Internet Explorer icon to the desktop in Windows 7 is to create a shortcut. To create a shortcut to Internet Explorer on your desktop, follow these steps: Click Start, and then locate the Internet Explorer icon on the Start menu. If you do not see the Internet Explorer icon on the Start menu, look in the Programs or the All Programs folders on the Start menu.Note If you cannot locate the Internet Explorer icon on the Start menu, follow these alternative steps or, if you are not using Windows 7, use Method 2 . Right-click and drag the Internet Explorer icon from the Start menu to your desktop, and then click Create Shortcuts Here, or click Copy Here.A shortcu...

Installing AHCI driver in Windows after the installation of Windows XP results in boot failure. You can get PXE error or "No boot device could be detected" messages or continuous Restart may happens while you boot your system in Windows XP. The solution for this issue is change the SATA mode in the BIOS from AHCI to IDE. You can access the BIOS settings by hitting F2 while BIOS is loading. Change the HDD SATA mode from AHCI(usually called RAID by Intel) to IDE. Change first boot disk priority to HDD, then DVD/CD, then Network, etc. Before exiting from BIOS press F10 to save this changes and reboot the system. The OS will loaded. Thnaks

General instruction for finding your optimal MTU size Go to Start and select Run. Set router to MTU 1500 to start with. Start RUN Type in cmd (Windows 2000/XP/Vista/7) or command (Windows 98/ME) into the box . Hit the enter key or click OK At the DOS prompt, type in ping bbc.co.uk -f -l 1492 and hit the Enter key. If you get the response "Packet needs to be fragmented but DF set", lower the size the packet in increments of +/-10 (e.g. 1472, 1462, 1440, 1400) until you have a packet size that does not fragment. Now increase the packet size from this number in small increments until you find the largest size that does not fragment. Add 28 to that number (IP/ICMP headers) to get the optimal MTU setting. For example, if the largest packet size from ping tests is 1462, add 28 to 1462 to get a total of 1490 which is the optimal MTU setting and can be put in your router's settings! Hope this helps some of you!? Source : NETGEAR site.

When the system connected to the router in wired mode we can get the very good internet speed. The Problem identified with Intel Centrino Wireless-N 1030 and 6230 adapter with Bluetooth has low internet speed when we connect the Laptop to ADSL2+ Modem Wireless-N router. This type of router can support upto 150/300 mbps in Wireless - N mode. The network icon in the task bar shows that the system has intenet access or limited connectivity. But you may experience very low speed internet. This is very specific to the wireless -N adapter 1030 and 6230. Solution: In the router side Open the router by entering the default IP of router 192.168.0.1 or 192.168.1.1 user: admin password: password Under setup select the wirless settings page In the mode section select g & b as mode and save this configuration and logout the router and reconnect the laptop with router in wireless mode. Now U can have the very good browsing experience in the 802.11g mode even with ...

Login to the ADSL2+ Modem Router   http://192.168.1.1/ User name: admin PW: password Basic Settings Does your internet connection require a login? Yes Encapsulation: PPPoE (PPP over Ethernet) Login: Password: Service name: Internet IP address: Get dynamically from ISP (or if you had obtained a static IP from BSNL on request, you can enter it here) Primary DNS: 218.248.255.145 Secondary DNS: 218.248.255.146 NAT: Enable Note: For the DNS fields, please use the DNS IPs that was provided to you initially. If you cannot access certain websites over WiFi, it is most certainly because of wrong DNS addresses. If you are not sure of your old DNS addresses, try the IPs 8.8.8.8 and 8.8.4.4 (Google Public DNS) Now click on Apply and wait for a moment while the page refreshes with the updated settings. Then click on ADSL Settings. ADSL Settings Multiplexing Method: LLC-Based VPI: 0 VCI: 35 DSL Mode: Auto (Multi-Mode) Now click on Apply.

The Department of Posts has signed a Memorandum of Understanding (MOU) with Unique identification Authority of India (UIDAI) to become a Registrar for enrolment process for issue of UID cards (Aadhaar cards). UIDAI’s mandate is to issue every resident a unique identification number linked to the resident's demographic and biometric information, which they can use to identify themselves anywhere in India, and to access a host of benefits and services. With Aadhaar, a resident will be able to prove his identity for various purposes like opening bank account, availing health services, getting mobile connection etc. Enrolment process by the Department of Posts has commenced in many states in the country. Tamil Nadu Postal Circle, which covers both Tamil Nadu State and Pondicherry UT, has proposed to commence the enrolment in Tamil Nadu. Enrolment of residents for Aadhaar cards will be launched at Anna Road Head Post Office, Chennai 600002 on 25/10/2011 and at General Post Office...

The process of issue of Aadhaar Unique Identity Cards (UID) has begun in Tamil Nadu during January 2011. The Union Minister of State for Parliamentary Affairs, Personnel, Public Grievances and Pension and Prime Minister’s Office V. Narayanasamy has launched the prestigious project of Aadhaar enrollment with much fanfare. The project has also been launched in Pondicherry Union Territory. The UID Aadhaar Card is set to be integrated with Smart Cards to be rolled out by the government for Public Distribution Systems in Pondicherry / Puducherry. The ration cards will be replaced by UID cards. Pondicherry was the first in the country to link a major public service like PDS with the Aadhaar UID Cards. The Aadhar issue process in Puducherry will be implemented in three phases. The first phase would be a two week pilot phase at Pillaichavadi. The second phase would cover the entire Puducherry region, which consists of 8,71,340 residents. The third phase of the Aadhaar in Pondicherry would c...