CellOne GPRS WAP Settings in mobile and Laptop

The following are the BSNL GPRS activation settings in South India at the time of writing this blog post.

To activate GPRS
Post Paid Customers should send the following SMS to 53733

1. GPRS199 – Rs 199/month; unlimited usage
2. GPRS49 – Rs 49/month; After 5 MB usage, each 10 KB costs 3 paise
3. GPRSF – No monthly fee; each 10 KB costs 5 paise

Pre Paid customers should send the following SMS to 53733

GPRSPRE – each KB costs 2 paise

To deactivate GPRS facility:
Send the following SMS to 53733
GPRSD

Activate the automatic GPRS settings:
Visit http://218.248.72.246/msp/html
OR
SMS the following to 58355
MODEL MAKE
e.g. NOKIA 6070

BSNL INTERNET Settings: (This is what enabled internet access for my mobile applications)

1. Select Settings from Menu > Settings >Configuration>Personal configuration settings>Options>Add new>Access point

2. Connection name: BSNL GPRS

3. Data bearer: GPRS

4. Access point name: gprssouth.cellone.in

5. User name:

6. Prompt password: No

7. Password:

8. Authentication: Normal

9. Press Back to save the settings.

10. Press “Activate default in all applications”

PC configuration (With Nokia PC Suite)

Install software (PC suite & original cable driver).

Click on Internet settings in PC suite

1. Click on settings in one touch Access in Nokia PC Suite

2. Select Modem of Mobile Modem (eg: Nokia N72 USB Modem) and press Next

3. Click on Configure Manually and press Next

4. fill the blanks like

Access point: gprssouth.cellone.in OR bsnlsouth

UserName: Mobileno (9194xxxxxxxx)

Password: Mobile no (9194xxxxxxxx)

and press finish

To start browsing, click Connect

http://doctor82.blogspot.com/2009/03/bsnl-gprs-settings-what-worked-for-me.html

Comments

Post a Comment

Popular posts from this blog

Navagraha Temples - Route Map (Powered by Google)

This is the guide for visiting all 9 Navagraha stalams from Kumbakonam. This map starts from kumbakonam. The following is the order of Stalams. Start point is Kumbagonam: (A) Thingaloor Chandiran temple(B) Alagudi Guru temple(C) Thirunageswaram Raghu temple(D) Suriyanar Temple(E) Kanjanoor Sukiran temple(F) Vaitheswaran temple for Chevvai(G) Thiruvengadu Budhan temple(H) Keezha perumpallam Kethu temple(I) Thirunallaru Sani temple(J) End your journey at Kumbakonam(K). Route Map Short URL: http://goo.gl/maps/iugZJ View Larger Map See the pdf file for route map Alternate way from Kumbakonam is as follows From Kumbakonam-A Thingalur Chandiran stalam-B Alagudi Guru stalam-C Thirunallaru Shani stalam-D Keezha perumpallm Kethu stalam-E Thiruvengadu Budhan stalam-F Vaitheeswaran koil Chevvai stalam-G Kanjanoor Sukiran stalam-H Suriyanar stalam-I Thirunageswaram Raghu stalam-J End point Kumbakonam.-K Short URL: http://goo.gl/maps/Ruf5O  ...
Read more

Legacy PACE Drivers (iLok) crashes and BSOD Windows 10, couldn't install Avid Media Composer v8.x (RESOLVED)

Hey all, I want to share with you my nightmare experience attempting to install Avid MC 8.5.3 on my new Windows 10 machine, and share the solution I found I couldn't install Avid MC v8.x on my Windows 10 workstation due to MC forcing me to install an outdated and unsupported PACE Driverst. Every time I would run the Avid MC installer, when it asked for a reboot after the install completed, my computer would not boot back up. It would repeatedly crash on the "dots spinning in a circle" startup screen, turn into "attempting repairs," and then bring me to the boot recovery menu.  After some experimenting I found the culprit: I began the installation of Avid MC only to where it installs Legacy PACE Drivers, and didn't actually install Avid MC v8.x. It asked me for a reboot and then the same crash sequence happened. This told me that Legacy PACE Drivers was the cause of the crashing. The problem was that Avid MC v8.x installation was attempting to force the insta...
Read more

NetGear DGN1000 - MTU, Partial Loss of Internet Connection, and Performance

MTU (Maximum Transmission Unit) is the largest packet a network device transmits. The best MTU setting for NETGEAR equipment is often just the default value. MTU is sometimes presented as something that can be easily changed to improve performance, but in practice this may cause problems. Leave MTU unchanged unless: You have problems connecting to your ISP, or other Internet service, and either the technical support of the ISP or of NETGAER recommends changing MTU. These may require an MTU change: A secure Web site that won't open, or only displays part of a Web page Yahoo email MSN AOL's DSL service You use VPN, and have severe performance problems. You used a program to "optimize" MTU for performance reasons, and now you have connectivity or performance problems. An easy solution to most problems is to change MTU to 1400. If you are willing to experiment, gradually reduce MTU as described in "Details of MTU", below. How to Change a C...
Read more