Dr.P.Thirunavukkarasu's blog

MTU (Maximum Transmission Unit) is the largest packet a network device transmits. The best MTU setting for NETGEAR equipment is often just the default value. MTU is sometimes presented as something that can be easily changed to improve performance, but in practice this may cause problems. Leave MTU unchanged unless: You have problems connecting to your ISP, or other Internet service, and either the technical support of the ISP or of NETGAER recommends changing MTU. These may require an MTU change: A secure Web site that won't open, or only displays part of a Web page Yahoo email MSN AOL's DSL service You use VPN, and have severe performance problems. You used a program to "optimize" MTU for performance reasons, and now you have connectivity or performance problems. An easy solution to most problems is to change MTU to 1400. If you are willing to experiment, gradually reduce MTU as described in "Details of MTU", below. How to Change a C...

First we will try to remove read only attribute from the specific drive. Warning : Be sure to do this on the right disk since the diskpart command can do serious damage if you run it on the wrong disk. 1) Start Menu -> Run(or in search box) -> Type 'cmd' -> press 'Enter' -> Command Promt will open 2) Type 'Diskpart' -> enter -> 'list disk' -> enter 3) Select the disk you are going to modify, if your required USB disk is in 'disk 4' then 4) type 'select disk 4' -> enter , now disk 4 is selected, 'list disk' will show star(*) beside it 5) 'list disk' -> enter To Clear the Read-Only attribute on the selected disk (To Disable write protection): 6) Type 'attributes disk clear readonly' -> enter The disk is no longer Write protected. The Read-Only attribute is removed. If you wish to set the write protection again, just do the same procedure and Type 'attributes disk set reado...

In case anybody is facing certificate issues in Yahoo mail in Windows XP operating system first you check the Service Pack installed in the system. If it is SP 2 means it will not work. Upgrade to SP3 then the issues disappeared. To get Windows XP SP3 click the link below http://www.microsoft.com/en-us/download/details.aspx?id=24

This is the guide for visiting all 9 Navagraha stalams from Kumbakonam. This map starts from kumbakonam. The following is the order of Stalams. Start point is Kumbagonam: (A) Thingaloor Chandiran temple(B) Alagudi Guru temple(C) Thirunageswaram Raghu temple(D) Suriyanar Temple(E) Kanjanoor Sukiran temple(F) Vaitheswaran temple for Chevvai(G) Thiruvengadu Budhan temple(H) Keezha perumpallam Kethu temple(I) Thirunallaru Sani temple(J) End your journey at Kumbakonam(K). Route Map Short URL: http://goo.gl/maps/iugZJ View Larger Map See the pdf file for route map Alternate way from Kumbakonam is as follows From Kumbakonam-A Thingalur Chandiran stalam-B Alagudi Guru stalam-C Thirunallaru Shani stalam-D Keezha perumpallm Kethu stalam-E Thiruvengadu Budhan stalam-F Vaitheeswaran koil Chevvai stalam-G Kanjanoor Sukiran stalam-H Suriyanar stalam-I Thirunageswaram Raghu stalam-J End point Kumbakonam.-K Short URL: http://goo.gl/maps/Ruf5O  ...

NAVAGRAHA TEMPLES நவகிரக தல யாத்திரை வழிகாட்டி GNAYIRU – SUN – SOORIYANAR KOIL- சூரியன் Moolavar: Sri Kasi Viswanathar The first Navagraha temple is the Suryanar Koyil. It is situated in the small village called Tirumangalakkudi of Tamil Nadu. Thirumangalakudi is located just one Kilometer north of Aduthurai, which lies in between Kumbakonam (15.km) and Mayiladuthurai(20.km) on the bus route as well as Train route. Devotees visit this temple to offer remedies for the bad effects of the sun and all other planets. It is an exclusive shrine dedicated to the Sun God and was built during the Chola period. Pilgrims worship Lord Siva – Sri Prananathar and Goddess Sri Mangalambigai at Thirumangalakudi and then go to Suriyanarkoil to worship Navagrahas. In Suriyanarkoil the sun is the main deity and other grahas are installed in separate sanctums. MAP URL: http://goo.gl/maps/Kp6Oo View Larger Map THINGAL – MOON - CHANDHIRAN – THINGALUR - சந்திரன் ...

By  Jack Wallen October 6, 2010, 12:21 PM PDT Takeaway:  Jack Wallen shows you how to use the Microsoft Windows Shared Folder Wizard to create folders that can be shared with colleagues across the network. If you work in any kind of environment where there are multiple users, chances are you will need to share one or more folders with your colleagues. For many administrators, this is a very simple task. For some, however, this task seems to be rather elusive. And what happens when you want to give your end users the ability to share the necessary folders to everyone? Are you going to walk through the sometimes complicated task of folder sharing? Or what about training your junior admins on the art of folder sharing? For those end users (or even for some administrators with less knowledge of such tasks), there is a very easy-to-use  Microsoft Windows  Wizard for sharing folders. This wizard is the Shared Folder Wizard, and it is included in Windows XP Pro...